Architectural and Designers specification

Please specify on your Drawings the following to ensure ease of Purchase and ensure the originality of the product.

Applications

Suitable for many commercial applications including: Shopping Centres, Bar Tops, Counter Tops, Shopfronts, Doorways, Bottle Shops, Sports Complexes, Arcades, Clubs, Ventilation Security,

Opening sizes:

5000mm wide x 3600mm High in a single span

Features

Designed for maximum security, the Aurora Roller shutter have a large range of options. The Aurora is available in part or full slotted with or without clear dust proof infills.

Operation

All doors are counterbalances per manual operation and motorisation is optional. There is a wide range of control methods available with motorised doors which can be discussed when determining your requirements.

Finish

The Bottom Rail, Guides and Mid Rail rail are supplied in a clear anodised finish (matt Natural), but can be powder coated as an option.

Curtain

Is constructed from 41mm x 1.2mm flat aluminium interlocking extruded slat.Both ends of the aluminium section are fitted with specially shaped moulded end clips to reduce friction during operation and prevent lateral movement within guides. Can be slotted 95mm x 25mm @ 70mm spacing

Side Guide

50mm x 30mm extruded aluminium section with specifically shaped retainer to enable us of optional nylon buffer

Locking

Shall be centrally mounted two way Mortice Key Lock or Sliding Shoot Bolt Lock mounted within the bottom rail.

Bottom Rail

88mm x 48mm specially extruded snap on section to prevent door from rising through the bulkhead, yet enable ease installation where recessed guides are used.

Brackets

Manufactured from 90mm x 40mm slotted angle

Roller Drum

Manufactured from 150mm or 230mm spiral ducted tube attached to ball bearing drum wheels rotating on a 34mm steel shaft. The shaft shall be fitted with helical springs designed to counterbalance the curtain weight throughout its operation. The drum shall be designed to give minimum deflection over the span.

Mullions

Specially designed 130mm x30mm one piece extrusion for straight openings and two piece sections that can be set to any angle and shall be used for wide openings and multiple door installations.

Mullions shall be lift out type with shoot bolts to base. Special wide mullions fabricated from aluminium sheet shall be used when two doors meet at an acute angle and no headroom exists for different mounting heights of doors (stacking).

A minimum of 100mm should be allowed below the bundle for correct door operation.

penings and multiple door installations.

Mullions shall be lift out type with shoot bolts to base. Special wide mullions fabricated from aluminium sheet shall be used when two doors meet at an acute angle and no headroom exists for different mounting heights of doors (stacking).

A minimum of 100mm should be allowed below the bundle for correct door operation.