A model up still features exceptional protection, strong functional security and aesthetic appeal. A multi-purpose security shutter with your choice of solid slats for block out design or slotted perforated for effective airflow or visibility.
Architectural and Designers specification
Please specify on your Drawings the following to ensure ease of Purchase and ensure the originality of the product.
Supply and Install SERIES 2 ALUMINIUM ROLLER SHUTTER Manufactured by ATLAS DOORS.
Applications
Suitable for many commercial applications including: Shopping Centres, Bar Tops, Counter Tops, Shopfronts, Doorways, Bottle Shops, Sports Complexes, Arcades, Clubs, Ventilation Security,
Opening sizes:
5000mm wide x 3600mm High in a single span
Features
Designed for maximum security, the Series 2 Aluminium Roller shutter have a large range of options.The Aurora is available in part or full slotted with or without clear dust proof infills.
Operation
All doors are counterbalances per manual operation and motorisation is optional. There is a wide range of control methods available with motorised doors which can be discussed when determining your requirements.
Finish
The Bottom Rail, Guides and Mid Rail rail are supplied in a clear anodised finish (matt Natural), but can be powder coated as an option.
Curtain
Is constructed from 65mm x 1.6mm flat aluminium interlocking extruded slat. .Both ends of the aluminium section are fitted with specially shaped moulded end clips to reduce friction during operation and prevent lateral movement within guides. Can be slotted 95mm x 25mm @ 70mm spacing
Side Guide
50mm x 30mm extruded aluminium section with specifically shaped retainer to enable us of optional nylon buffer
Locking
Shall be centrally mounted two way Mortice Key Lock or Sliding Shoot Bolt Lock mounted within the bottom rail.
Bottom Rail – 88mm x 48mm specially extruded snap on section to prevent door from rising through the bulkhead, yet enable ease installation where recessed guides are used.
Brackets – Manufactured from 90mm x 40mm slotted angle
Roller Drum
Manufactured from 150mm or 230mm spiral ducted tube attached to ball bearing drum wheels rotating on a 34mm steel shaft. The shaft shall be fitted with helical springs designed to counterbalance the curtain weight throughout its operation. The drum shall be designed to give minimum deflection over the span.
Mullions
Specially designed 130mm x30mm one piece extrusion for straight openings and two piece sections that can be set to any angle and shall be used for wide openings and multiple door installations.
Mullions shall be lift out type with shoot bolts to base. Special wide mullions fabricated from aluminium sheet shall be used when two doors meet at an acute angle and no headroom exists for different mounting heights of doors (stacking).
A minimum of 100mm should be allowed below the bundle for correct door operation.
Profile
Bulkhead Details
