Atlas's SupaClear has emerged as a highly regarded choice for commercial buildings, seamlessly integrating top-tier security features with an impressive aesthetic appeal and remarkable strength. By utilizing your after-hours display effectively, you can not only add depth to your product lineup but also maximize every potential marketing opportunity that comes your way, ensuring that your brand stands out in a competitive marketplace.
Architectural and Designers specification
Please specify on your Drawings the following to ensure ease of Purchase and ensure the originality of the product.
Supply and Install SUPACLEAR ROLLER SHUTTER Manufactured by ATLAS DOORS.
Applications
Suitable for many commercial applications including: Shopping Centers, Bar Tops, Counter Tops, Shopfronts, Doorways, Bottle Shops, Sports Complexes, Arcades, Clubs, Ventilation Security,
Suitable for openings up to 3200mm x 3000 (manual) and 5700mm x 3600mm (motorised)
Features
An innovative design featuring 100mm extruded clear polycarbonate roller shutter which enable vision of your merchandise whilst providing security and vermin proof protection
Operation
All doors are counterbalances per manual operation and motorisation is optional. There is a wide range of control methods available with motorised doors which can be discussed when determining your requirements.
Finish
The Bottom Rail, Guides and Mid Rail rail are supplied in a clear anodised finish (matt Natural), but can be powder coated as an option.
Curtain
Is constructed from clear polycarbonate extrusion interlocking with continuous convex aluminium rigid sections. Both ends of the aluminium section are fitted with specially shaped moulded end clips to reduce friction during operation and prevent lateral movement within guides. Can be slotted 95mm x 25mm @ 70mm spacing
Side Guide
50mm x 30mm extruded aluminium section with specifically shaped retainer to enable us of optional nylon buffer
Locking
Shall be centrally mounted two way Mortice Key Lock or Sliding Shoot Bolt Lock mounted within the bottom rail.
Bottom Rail – 29mm x 48mm specially extruded snap on section to prevent door from rising through the bulkhead, yet enable ease installation where recessed guides are used.
Brackets – Manufactured from 90mm x 40mm slotted angles
Roller Drum
Manufactured from 150mm or 230mm spiral ducted tube attached to ball bearing drum wheels rotating on a 34mm steel shaft. The shaft shall be fitted with helical springs designed to counterbalance the curtain weight throughout its operation. The drum shall be designed to give minimum deflection over the span.
Mullions
Specially designed 130mm x30mm one piece extrusion for straight openings and two piece sections that can be set to any angle and shall be used for wide openings and multiple door installations.
Mullions shall be lift out type with shoot bolts to base. Special wide mullions fabricated from aluminium sheet shall be used when two doors meet at an acute angle and no headroom exists for different mounting heights of doors (stacking).
A minimum of 100mm should be allowed below the bundle for correct door operation.
Profile
Bulkhead Details
